Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Parts & Welding in Tarzana: What It Costs and How We Fix It
Gate parts and welding work in Tarzana typically runs $180 to $950 depending on whether we’re replacing a hinge, reinforcing a post, or converting a failing swing gate to a slide system. Most hinge replacements and weld repairs on Tarzana’s flatland ranch homes run on the lower end, while the big hillside estate gates south of Ventura Blvd land higher because the work involves heavier steel, longer posts, and more welding time. We serve all of Tarzana’s 91356 and 91357 zip codes and can usually have a technician at your driveway within a day. Call (747) 308-3262 and Victor or a member of our team will give you a straight answer on what’s wrong and what it costs to fix.
Why Tarzana Driveway Gates Fail the Way They Do
Tarzana doesn’t have one kind of gate problem. It has two, and they live on opposite sides of Ventura Blvd. North of the boulevard, in the 1950s through 1970s tract neighborhoods off Reseda Blvd and Tampa Ave, gates are mostly single-panel wood or tubular steel on flat lots. Those call for hinge replacements, latch work, and the occasional post reset. South of Ventura, up in the hills around the Braemar Country Club estates, the picture changes completely. Large custom wrought iron and powder-coated aluminum gates sit on steep slopes, many of them 15 to 25 years old and running on original FAAC, Linear, or LiftMaster operators. Those gates drift open or slam shut under their own weight. Hinges strip. Posts bend. Operators burn out trying to hold a gate that gravity never wanted to be a swing gate in the first place.
That’s why our Gate Parts & Welding work in Tarzana skews heavily toward post replacement, custom welding, and slide gate conversions rather than simple hinge swaps. We’re not patching the same problem every six months. We’re fixing the underlying geometry so the gate works the way the hillside allows it to.
Fast, Reliable Gate Parts & Welding Across Tarzana
When a gate post bends or a weld cracks on a Tarzana driveway, the clock starts. A gate that won’t close is a security issue, and a gate that won’t open traps cars. We answer the phone 24 hours a day, seven days a week. Not an answering service. A live person. If you’re in Tarzana and need Gate Parts & Welding, call (747) 308-3262 and tell us what happened. Victor Salinas leads our Tarzana service work, and he’s been welding and rebuilding driveway gates long enough that he can usually diagnose the problem from a phone description and bring the right steel, the right hinge hardware, and the right welding rig on the first trip.
Our crew works throughout Tarzana, from the ranch neighborhoods north of the Orange Line busway down to the gated estates off Braemar Drive and Vanalden Ave. We carry hinge posts, weld plate, rollers, and rack stock in the truck most days, which means fewer return trips and less time you’re waiting with a broken gate.
Our Gate Parts & Welding Services in Tarzana
Hinge Replacement
On Tarzana’s hillside driveways, a stripped or seized top hinge is rarely just a hinge problem. The slope puts constant lateral load on the gate leaf, and when the hinge fails, the whole gate sags. We replace hinge hardware with heavier gauge than what the original installer used, welded true to the post. A standard hinge replacement on a flatland Tarzana gate typically runs $180 to $320. On a heavy double-swing estate gate with custom strap hinges, expect $400 to $700.
Post Replacement
We replaced the hinge post on a wrought iron swing gate off Braemar Drive after Santa Ana winds bent the original post and stripped the top hinge. The root of the problem was a post that was set too shallow for the weight of the gate and never properly tied into the hillside. Our fix was a deeper post footing, welded reinforcing plates, and a realignment of the gate so it stopped fighting its own grade. Post replacement in Tarzana typically runs $450 to $950 depending on post size, footing depth, and whether we need to cut concrete or dig into hillside rock. On sloped lots, we over-engineer the footing because the wind and gravity load is constant.
Rail Repair
Slide gates on Tarzana’s flatter streets and the long driveways coming off Burbank Blvd live and die by their rail and roller condition. When the rail gets bent by a car bump or warps from 105°F summer heat expansion, the gate starts jerking and binding mid-travel. We straighten, reinforce, or replace top and bottom rails, then set roller tension so the gate moves with one hand. Rail repairs in Tarzana run $220 to $550 depending on rail length and whether we’re repairing or replacing.
Custom Welding
Some Tarzana gates were fabricated by tract builders forty years ago and were never meant to carry the weight they carry now. Custom welding lets us reinforce frames, add pickets where tree branches or wind have broken them loose, and build new gate leaves that match the existing look. We weld on site, so the gate stays in place while the repair happens. Custom welding in Tarzana starts around $250 for a small frame or picket repair and runs $800 to $1,500 for a full gate build or significant structural reinforcement. We quote every weld job before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Rollers: The Overlooked Part That Wears Out First
We see more roller failures in Tarzana than just about any other gate part. The combination of Valley heat, dust, and the constant micro-movement from thermal expansion wears bronze and nylon rollers faster than coastal LA ever does. When rollers flatten or seize, the gate drags, the motor amps up, and the operator circuit board eventually fails trying to push a gate that weighs three times what it should. Replacing rollers early, before the board burns out, is a $180 to $280 fix that saves an $800 to $1,200 operator replacement. On Tarzana’s hillside estates, we replace rollers as a regular maintenance item, not a rescue call.
Trusted Brands We Service in Tarzana
Most of the estate gates in the Braemar Country Club area run on FAAC, Linear, or LiftMaster operators installed in the early 2000s. By now, those units are at the end of their expected service life, and the failure mode is usually heat-related. We stock parts for those brands and for DoorKing, Elite, and Mighty Mule systems, which means a service call on a Tarzana gate doesn’t stall out waiting for a part to ship from the factory. If we have to order a specific board or gear assembly, we’ll tell you the lead time and the exact cost before we order it.
Common Gate Parts & Welding Problems We See in Tarzana Homes
- Slope-driven hinge stripping: On inclined driveways south of Ventura Blvd, swing gates want to drift downhill. Every drift puts shear load on the hinge pins, and eventually the hinges strip and the gate droops. Patching the hinge won’t fix it. The gate needs to be re-graded, re-hung, or converted to a slide system.
- Summer heat binding: Tarzana regularly hits 105°F, sometimes for a week straight. Steel gates expand in that heat and bind on tracks or rub posts. Gate operator circuit boards also overheat and drop dead on the hottest afternoons. We see this every summer.
- Santa Ana wind damage: When the winds funnel through the Santa Monica Mountains canyons in the fall, they hit hillside gates with sudden lateral gusts. Swing gate frames bend, hinge posts lean, and hardware shears. Every fall, we get a surge of post-wind repair calls from the hills above Ventura Blvd.
- Undergraded swing gates: On the sloped private driveways near Braemar Country Club, original swing gates were often installed by tract builders who never properly graded for the incline. The gates swing open or closed on their own. We convert these to cantilever slide systems, which ride on a rail and don’t depend on hinges fighting gravity.
Pricing for Gate Parts & Welding in Tarzana, CA
Here’s what you can expect to pay in Tarzana, with the understanding that every gate is a little different.
- Hinge replacement: $180 to $700 depending on gate weight and hinge style
- Post replacement with welded footing: $450 to $950
- Rail straightening or replacement: $220 to $550
- Custom welding repair: $250 to $1,500 depending on scope
- Roller replacement: $180 to $280 per gate
- Full swing-to-slide conversion: $1,800 to $4,500 depending on gate size, slope, and operator choice
Every price is quoted and agreed before any work starts. No surprises on the bill. We also honor a standing $50 discount on any repair over $250, a free second opinion on any written estimate, and a 5% discount for seniors and veterans. Estimates are free. Call (747) 308-3262.
We Also Serve Cities Near Tarzana
While this page covers Gate Parts & Welding in Tarzana, our crews regularly work in Reseda, Winnetka, Canoga Park, and Topanga. If you’re on the edge of Tarzana or just over the city line, call us and we’ll confirm your address. Chances are we’re already in your neighborhood this week. Call (747) 308-3262.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tarzana
Swing gates drift on slopes because the original installer never properly graded the gate for the incline, and gravity is pulling the gate downhill every time the operator releases. The fix is usually to re-hang the gate, replace worn hinges, or convert to a cantilever slide system that doesn’t rely on fighting gravity. On Tarzana hillside driveways, a slide conversion typically runs $1,800 to $4,500 and ends the drift problem permanently. Call (747) 308-3262 for a free assessment and a written price before we start.
Yes, in almost every case we can cut out the old post, set a new one with a deeper footing, and weld your existing gate back onto it. You don’t lose the gate, and you don’t pay for a new gate. Post replacement on a Tarzana gate typically runs $450 to $950, including welding and realignment. We’ll show you the exact number before we begin.
We do. On hillside Tarzana properties where running mains power down a long driveway means trenching through rock and mature landscaping, a solar gate opener is often the cleaner, cheaper answer. We size the panel and battery to the gate weight and the number of daily cycles, and we install the operator, arm, and safety edges as a complete system. Solar opener installs on Tarzana gates typically run $1,400 to $3,200 depending on gate size and panel needs. Call (747) 308-3262 and tell us about your driveway.
Summer heat in Tarzana expands the steel rail and the gate frame, and if the gate was installed without enough thermal clearance, it binds mid-travel. The rollers and rail take the brunt, and the operator pulls more amps trying to push through the bind. The fix starts with a track inspection and roller replacement, which usually runs $180 to $280. If the rail is warped beyond adjustment, replacement runs higher. Call (747) 308-3262 and we’ll diagnose it.
Yes. We weld internal frame gussets and corner plates, replace light-gauge stock with heavier steel where wind load has bent the frame, and set posts deeper into the hillside. Most wind reinforcement jobs on Tarzana gates run $300 to $900 depending on the extent of the damage and the size of the gate. Fall is when the winds arrive. Call (747) 308-3262 before the next Santa Ana event and we’ll get your gate ready.
Call Ironworks Gate Co. for Gate Parts & Welding in Tarzana
Your Tarzana gate is a moving part on a slope, in the heat, in the wind. It fails in ways that flatland gates don’t. We know those failure modes because we see them every week, from the Braemar Country Club estates down to the ranch homes north of Ventura. We quote before we work. We weld it right the first time. We stand behind every job with a written 90-Day Done Right Promise. If it’s not right, we come back and make it right. Call (747) 308-3262 today and talk to a real person who can tell you what’s wrong and what it costs to fix.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Tarzana since our founding in 1984 and continuing to serve the Valley with the same standard of work on the 400th gate as the first.