Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Calabasas Homeowners
A gate that drags, sags, or refuses to open isn’t just a nuisance, it’s the first thing that greets you when you pull into your own driveway. For 42 years, Ironworks Gate Co. has repaired driveway and estate gates throughout Calabasas, Hidden Hills, Bell Canyon, and the surrounding canyons, and we answer the phone when you call. Victor Salinas leads a team of background-checked, uniformed technicians who arrive with the right parts on the truck and the experience to fix the problem on the first visit. The repair is quoted and agreed before we turn a single bolt, protected by our written 90-Day Done Right Promise, and you can reach a live person at (747) 308-3262 24 hours a day, 7 days a week.
If you’re searching for Gate Repair in Calabasas, you’ve found a company that treats your gate like it’s our own. No voicemail trees. No callback queues. No surprises on the bill. Just a square deal, done right, and backed in writing.
What Our Gate Repair Service Includes
Gates fail in predictable ways, but the fix needs to account for how the gate was built, where it sits, and how much the hillside has shifted since it was hung. Calabasas clay soil expands and contracts with every rainy season, and gates that were plumb twenty years ago rarely are today. Our Gate Repair in Calabasas covers the full mechanical and electrical system, from the hinges to the keypad. Here’s exactly what we handle.
Electric Gate Repair
Electric gates combine a physical gate with a control system, and when the two fall out of sync, the result is a gate that stops mid-travel or refuses to respond to the remote. We trace the problem from the opener to the wiring to the gate itself, rather than replacing parts on a guess. Most Best Gate Repair in Calabasas, CA jobs are completed in a single visit, with the price agreed before we start. If the board is dead, we tell you. If the actuator is working but the gate needs realignment, we tell you that too, and you’ll pay only for what’s actually wrong.
Automatic Gate Repair
Automatic gate repair is what people usually mean when they say the gate “stopped working.” That can mean the motor hums but the gate doesn’t move, the gate opens but won’t close, or the safety sensors keep tripping for no reason. We service nine automation brands, so whether the unit on your driveway is a DoorKing from the early 2000s or a newer LiftMaster, we’re trained and equipped to diagnose it correctly. Our technicians carry the common failure parts for these systems, which is why most Emergency Gate Repair in Calabasas, CA calls are handled on the first visit.
Hinge & Post Repair
Hinges carry the entire weight of the gate, and when a hinge wears, the gate drops and starts to scrape or bind against the post. In Calabasas, we regularly see hinge failures on gates that have been carrying extra weight from stucco, stone, or decorative ironwork for decades. We repair or replace worn hinges, weld cracked hinge plates, and reset posts that have shifted out of plumb due to soil movement. The goal is a gate that swings true and closes softly, like the day it was hung.
Gate Realignment
A gate that no longer meets the latch cleanly or swings too far on its hinges is a realignment job. Realignment involves adjusting the hinges, the post clearance, or the limit settings on the opener so the gate travels the full distance and stops where it should. This is precision work; a gate that’s out by half an inch at the hinge is out by several inches at the latch. We measure and adjust until the gate closes square every time, which matters as much for security as it does for the lifespan of the motor.
Lock Repair
Whether it’s a mechanical deadbolt, a mag lock, or a solenoid that’s stopped releasing, a gate lock that doesn’t work is a security problem, plain and simple. We replace worn lock internals, re-align strike plates, and when a lock is too far gone, we install a new one that matches the gate and the access system. If the lock is tied into a keypad or intercom, we make sure the whole circuit works together, not just the lock by itself.
Weld & Rust Repair
Wrought iron and steel gates in Calabasas live in a dry climate most of the year, but the marine layer from Malibu and the winter rains still find their way into joints and seams. We grind out rust, weld in new steel where the old metal has thinned, and treat the repaired area with primer and paint that match the existing finish. Victor Salinas started in this trade as a welder, and that craft runs through every repair we do, not just the ones that require a torch.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We repair automatic gate openers from nine major brands, and we’re not guessing when we open a control box. Our technicians are trained and equipped on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We’ve serviced hundreds of DoorKing units across the Conejo Valley and stocked their OEM parts for years, because DoorKing remains one of the most common openers on older Calabasas estates. We also fix a steady stream of LiftMaster and Mighty Mule residential operators, and we know the quirks of each generation of those boards.
What matters is that the technician who shows up at your gate knows exactly what he’s looking at. When we see an Elite actuator that’s drawing too many amps, we don’t throw parts at it, we find the mechanical bind that’s causing the strain and fix that. The correct fix on the first visit is the difference between a gate that runs for another decade and one that’s back in the shop in six months. Whether you have a Gate Repair need on a Gate Repair in Topanga property or a Calabasas driveway, and whatever opener sits on your gate, we can help.
Signs You Need Gate Repair Right Now
- The gate scrapes or drags along the ground. This means a hinge has worn or a post has shifted, and every cycle is putting strain on the motor and hinges in equal measure. The longer it scrapes, the more expensive the repair becomes.
- The gate opens but won’t close, or closes but won’t open. This is often a limit switch or safety sensor problem, but it could also be a board that’s failing intermittently. Either way, a gate that doesn’t close is an open invitation to anyone walking by.
- The motor runs but the gate barely moves. A chain that’s slipping, a gear that’s stripped, or an actuator that’s lost pressure can all cause this. We see it on Calabasas hillside gates more than flat driveways, because the grade adds continuous load to the system.
- The gate slams shut instead of closing softly. A gate that closes hard is dangerous, especially to children and pets, and it’s usually a hydraulic or limit-setting problem. This is a repair we recommend scheduling sooner rather than later.
- The keypad, remote, or intercom works only part of the time. Intermittent electronic failures are frustrating, but they’re also a warning that a board or receiver is on its way out. Finding the problem before it leaves you locked out or locked in saves a tow bill or a broken hinge.
Our Gate Repair Process - Step by Step
We work the same way on every gate job, and we’ve refined this process over 42 years so there are no surprises for you or for us.
- 1
You call, we answer. A live person picks up at (747) 308-3262, day or night. We ask what the gate is doing, what brand of opener you have, and when it started acting up. If it’s an emergency, we schedule accordingly.
- 2
We arrive when we say we will. Your technician shows up in a marked vehicle, in uniform, with the tools and common parts already on board. You’ll never wait on a callback to find out when someone is coming.
- 3
We diagnose, not guess. We test the opener’s draw, check the limits, inspect the hinges and welds, and only then explain what’s actually wrong. If it’s a simple adjustment, that’s what we tell you. If it’s a board or an actuator, we show you the evidence.
- 4
You approve the price before we touch a wrench. No work starts until the number is agreed in writing. The price we quote is the price you pay, and it doesn’t change when the job takes longer than expected.
- 5
We fix it, test it, and stand behind it. The gate runs through a full cycle test, multiple times, before we leave. Then the 90-Day Done Right Promise applies, in writing, no paperwork and no arguing. If it’s not right, we come back.
How Much Does Gate Repair Cost in Calabasas?
Gate repair costs in Calabasas depend on what’s failed and how far the damage has progressed. A simple realignment or limit adjustment typically runs $150 to $350. A hinge and post repair usually falls between $250 and $600, depending on the weight of the gate and whether the post needs to be reset in concrete. Circuit board replacement on an automatic opener typically runs $300 to $800, and a full actuator or motor replacement on a heavy driveway gate can range from $800 to $2,500 depending on the brand and the grade. Weld and rust repair is priced by the scope, but most residential repairs fall between $300 and $900.
What affects the price most is the weight of the gate and the condition of the surrounding hardware. A 600-pound steel gate takes more labor to realign than a 200-pound aluminum one, and a post that’s rotted at the base costs more than a hinge that simply wore out. The best way to avoid overpaying is to call someone who fixes the root cause, not the symptom. Our estimates are free, and we’ll show you what’s broken before you commit to anything. We also honor a $50 discount on any repair over $250, and a permanent 5% discount for seniors and veterans. Call (747) 308-3262 for an exact quote, settled before any work begins.
Gate Repair Near Calabasas - Our Service Area
We repair gates throughout Calabasas, Hidden Hills, Bell Canyon, Agoura Hills, Oak Park, Westlake Village, and across the valley into Tarzana, Winnetka, Canoga Park, and the Gate Repair in West Hills neighborhoods we serve. Most Calabasas calls get a technician on site within one business day, and emergency calls are prioritized. We’ve been in these canyons for over four decades, and we know how the soil moves under these hillside gates. You can also reach our home page any time to learn more about the full range of gate services we provide.
Serving Calabasas, CA - Our Local Coverage Area
We’re based in the Calabasas area and know this community well, and we also offer our Gate Repair in West Hills. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Calabasas
Gate repair is the process of diagnosing and fixing any problem that keeps a driveway or estate gate from operating correctly, including hinge wear, sagging posts, failed opener boards, broken locks, and rusted or cracked welds. It covers both the physical gate and the automation that drives it. Ironworks Gate Co. handles the full scope, from the hinge to the keypad.
Most gate repairs in Calabasas are completed in a single visit, typically within one to three hours on site. The job goes faster because we arrive with common parts already on the truck and we diagnose the problem before we start turning wrenches. Complex repairs, such as post replacement with new concrete, may need a second visit after the concrete cures.
Gate repair in Calabasas typically costs between $150 and $2,500, depending on the specific repair. Simple realignments and limit adjustments sit at the low end around $150 to $350. Hinge and post repairs range from $250 to $600, and full motor or board replacements can run $800 to $2,500. If you already have a written estimate from another company, we offer a free second opinion so you can compare numbers before you decide. Call (747) 308-3262 for an exact quote.
Yes. We service DoorKing, LiftMaster, and Mighty Mule, plus FAAC, BFT, Linear, Viking, Ghost Controls, and Elite. Our technicians are trained and equipped across all nine brands, and we stock OEM parts for the most common failures. Whatever opener is on your gate, we’ve likely repaired the same model this month.
We answer the phone 24 hours a day, 7 days a week, and we prioritize emergency calls from Calabasas homeowners. A gate stuck open or stuck shut is a security issue, and we treat it like one. Call (747) 308-3262 and a live person will tell you exactly when a technician can be at your property.
Every repair is protected by our 90-Day Done Right Promise, in writing. If the repair isn’t right, we come back and make it right, no paperwork and no arguing. That applies to the parts we install and the labor we perform, on every job, from a simple hinge to a full automation replacement.
Clear the gate’s travel path of cars, trash bins, or landscaping equipment so the technician has room to work safely. If you know the brand and model of your opener, have that handy, but don’t worry if you don’t; we’ll find it on the unit. If the gate is frozen shut, leave it as it is and we’ll handle it when we arrive. Scheduling a repair is as simple as calling (747) 308-3262 and we’ll handle the rest.
Schedule Your Gate Repair Service in Calabasas Today
Call (747) 308-3262 for a free estimate on gate repair in Calabasas. A live person answers, day or night, and there’s never an obligation. We’ll quote the price before any work starts, and every job carries the 90-Day Done Right Promise in writing. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Calabasas since 1984.