Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Calabasas, CA | Ironworks Gate Co.
We’re an independent Ghost Controls service provider offering Gate Repair in Calabasas, and we fix these openers on the driveways they were built for. What makes our Ghost Controls work different from a generic gate company is that we know the two things that matter most in this city: the Santa Ana winds that destroy actuator arms, and the HOA finish requirements that determine what parts we’re allowed to install. Call (747) 308-3262 when the gate stops responding. We answer live.
Why Calabasas Residents Choose Us for Ghost Controls Service
Victor Salinas grew up along the Las Virgenes corridor, close enough to the old feed-and-supply stretch that he still treats ironwork as a practical trade, not a decorative one. That’s the lens we bring to Ghost Controls work. We’ve spent years pulling apart TSS1 arms, DSX boards, and AXDP locks on estate gates throughout Calabasas so we know how each component fails and how to fix it on the first visit. We’re not a Ghost Controls authorized dealer, and we’re not trying to be. What we are is the Ghost Controls sales & service company that HOA managers across Calabasas call when a gate stops mid-cycle and the homeowner needs it working before the school run.
Every Ghost Controls job gets genuine OEM parts first. When a part is discontinued or backordered, we use only proven aftermarket equivalents matched to the same torque and voltage specs. No universal hack-jobs. Most Ghost Controls repairs in Calabasas are completed in a single visit with upfront pricing settled before we turn a single bolt.
Common Ghost Controls Gate Repair Problems We Solve in Calabasas
- Bent actuator arms on TSS1 openers. The Ghost Controls TSS1 uses a threaded screw drive arm that binds and bends its mounting bracket when the gate catches a wind gust. During Santa Ana season, we see stripped couplers and bent arms on slope-side estates along Mulholland Highway, where gusts push 50 mph or more. We replace the arm with OEM parts and check the hinge post for plumb so the opener isn’t fighting its own geometry.
- ‘Obstruction detected’ faults on DSX control boards. Calabasas’s low-humidity heat means dry, dusty relays and oxidized terminals. Ghost Controls DSX boards will fault out with an obstruction error even when the track is clean. We clean contacts or swap the board, then test the load sensor so the fix holds through the next heat wave.
- Cracked AXDP pedestrian gate lock keypads. The keypad membrane on Ghost Controls AXDP locks delaminates under intense UV. South-facing entries in The Oaks are the worst. Codes become intermittent, then stop reading entirely. We replace the membrane or the full lock assembly with OEM parts.
- TDS2 dual swing gates losing synchronization. When one leaf’s post shifts on hillside soil, often after post-fire erosion, one motor overdrives and burns out the RPM sensor. The result is one gate leaf that creeps faster than the other and eventually bind. We reset the geometry, replace the sensor when needed, and tune both motors to work as a pair.
- Remote control range shrinking to arm’s length. This is rarely the remote battery. More often it’s a failed antenna connection at the control board or a receiver that’s been cooking in a metal enclosure. We trace the signal path and replace what’s actually broken, not just the easy part.
Ghost Controls Service in Calabasas: What Local Conditions Mean for Your Equipment
There’s something specific about Calabasas that most homeowners only learn when they sell or refinance. The City’s municipal code, adopted from Los Angeles County fire access standards, requires automatic gates on hillside driveways to have a battery backup that can open the gate during a power shutoff. Here’s the part that catches people: a lot of early-2000s Ghost Controls installs in The Oaks and The Classics were wired without any backup at all. The gate worked fine for twenty years, so nobody thought about it. Then escrow opens and the inspector flags the gate. It’s now a common code-compliance repair we make for Calabasas homeowners, and it’s a job we can usually complete in one visit with a properly sized Ghost Controls battery backup matched to the operator’s current draw. If your gate is original to a 1998 to 2007 build and you’ve never had a backup installed, it’s worth a phone call to check.
Ghost Controls Models & Products We Service in Calabasas
We service the full Ghost Controls line that appears on Calabasas driveways and pedestrian entries. That covers the TSS1 Automatic Gate Opener Kit, the TDS2 dual swing gate opener, the AXDP pedestrian gate lock, and the DSX smart controller. Most of these we can repair same-day because we keep OEM boards, arms, couplers, and locks stocked locally. For older TSS1 units with a cracked housing or a burned board, we give you a straight repair-versus-replace quote. If the arm is worn past tolerance, we’ll tell you a new TSS1 kit is the smarter money rather than sinking the same cost into a failing legacy arm. That’s the kind of honesty that keeps Calabasas homeowners calling us back.
Ghost Controls Service Pricing in Calabasas
Ghost Controls repair pricing in Calabasas typically falls into these ranges:
- Diagnostic service call: $79-$129 (credited toward the repair when you proceed)
- Remote control programming or replacement: $55-$115
- AXDP pedestrian lock keypad membrane replacement: $120-$210
- TSS1 actuator arm replacement: $180-$340
- DSX control board replacement: $225-$475
- Battery backup installation for code compliance: $350-$650
These are Calabasas market numbers, not a generic national chart. What drives the final number is the model you have, what failed, and whether the gate geometry needs adjustment so the new part doesn’t fail the same way. Your price is quoted and agreed before any work starts. No surprises on the bill. Estimates are free. Call (747) 308-3262 for an exact quote.
Serving Calabasas, CA - Our Local Coverage Area
We’re based in the Calabasas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Calabasas
The obstruction fault on a Ghost Controls DSX board in Calabasas is usually caused by oxidized terminals or dust-packed relays from the dry heat, not an actual obstruction in the gate path. The board reads a resistance spike and flags it as a physical blockage. Cleaning the relay contacts and re-terminating the board usually clears it. If the board has been cooking in a sealed metal enclosure for years, replacement may be the more reliable route. Call (747) 308-3262 and we’ll diagnose it on site.
You can choose our Gate Installation in Calabasas for a 1980s tubular steel gate in The Classics, but the HOA will only approve it if the operator housing and any replaced hardware match the community’s approved finishes. We keep spec sheets for Calabasas HOAs, including The Classics, so we know which powder-coat colors and iron profiles are allowed before we order a single part. The gate itself usually works fine with a modern Ghost Controls opener once the hinge posts are plumb and the leaf weight is within the opener’s spec.
In most Calabasas cases we see, the problem is not the remote battery. It’s a failed antenna connection at the DSX control board or a receiver that has been baked inside an unventilated metal enclosure. We test the remote with a fresh battery first because it’s cheap and fast, then trace the antenna lead and replace the connection or receiver as needed. This usually restores range to 100 feet or more, which is what Ghost Controls rates these systems for in clear line-of-sight.
Yes. We install Ghost Controls battery backups on solar-powered gates throughout the Calabasas hills, including the post-Woolsey Fire rebuilds along the ridge properties. A properly sized backup keeps the gate functional during PSPS shutoffs and satisfies the fire access code requirements that many Calabasas homes were built without. We’ll match the backup to the operator’s current draw and the solar array’s charge output so it actually works when it needs to.
That pattern points to thermal expansion in the lock mechanism or a keypad membrane that’s delaminating under afternoon UV. South-facing entries in The Oaks get the worst of it. In the morning the metal has cooled and contracted enough to let the mechanism move; by afternoon the parts bind. We replace the failing membrane or rebuild the lock assembly with OEM Ghost Controls parts, and the lock works consistently from first light to last. Call (747) 308-3262 to schedule a diagnostic visit.
Service Areas Near Calabasas
We work throughout Calabasas and the surrounding foothill communities, including Calabasas service area by, Hidden Hills, Bell Canyon, Agoura Hills, and the western San Fernando Valley. For homeowners just over the ridge, we also provide Ghost Controls service in Topanga and Ghost Controls service in West Hills with the same OEM-first parts approach and same-day availability.
Book Your Ghost Controls Service in Calabasas Today
If the gate is giving you trouble, there is a reason; we just have to find it. Call (747) 308-3262 for a free estimate on Ghost Controls repair in Calabasas. A live person answers, 24 hours a day, and we’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Calabasas since 1984.