Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Calabasas Homeowners
A properly installed gate in Calabasas costs between $3,800 and $9,500 for a standard driveway application, and the work is typically measured, fabricated or ordered, and installed within two to four weeks once approved. Gate installation is not a one-day task, and any contractor who tells you otherwise is cutting corners somewhere you cannot see. Since 1984, Ironworks Gate Co. has built and hung gates across Calabasas, Hidden Hills, Bell Canyon, and the surrounding canyon communities, and we have watched too many homeowners pay twice: once for the cheap install, and again to have it done right with Best Gate Installation in Calabasas, CA.
Victor Salinas leads our installation team with a simple rule: the gate gets set square, welded clean, and hung to close like it was meant to last forty years. We do not rush a gate job. We measure, we confirm, we build, and we stand behind it with our written 90-Day Done Right Promise. If you are ready to talk through what your driveway needs, call us at (747) 308-3262. A live person answers, day or night.
What Our Gate Installation Service Includes
Every gate installation we take on starts with the same question: what does this gate need to do for the next thirty years? From there, the scope covers the structure itself, the automation if you want it, and the details most installers skip. Here is what we handle under one roof.
Driveway Gate
A driveway gate is the main entry point to your property, and it carries the heaviest load of any gate on the lot. In Calabasas, where driveways slope and canyon winds push against broad gate faces, the frame, hinges, and post footings have to be built for that strain, not just for the showroom look. We fabricate and install driveway gates with reinforced frames and set posts deep enough to hold the weight without sagging in year five.
Pedestrian Gate
A pedestrian gate is the smaller, walk-through gate beside or within the driveway entry, and it gets more cycles than any driveway gate ever will. The hardware on a pedestrian gate takes abuse: latch strikes, self-closing hinges, kick plates, and the occasional gate that gets yanked hard by a teenager late for school. We install pedestrian gates with commercial-grade hardware and set them so the latch and closer work with one finger, not a shoulder.
Sliding Gate
A sliding gate travels horizontally across the driveway opening, riding on a track or cantilever system rather than swinging out into the street. In Calabasas, many driveways are short with little room for a swing arc, which makes a sliding gate the right call. We install both tracked and cantilever sliding gates, and we grade and set the track so the gate rolls true instead of grinding against the stops.
Swing Gate
A swing gate pivots on hinges and opens inward or outward, usually as a single leaf or a pair of leaves meeting in the middle. The math on a swing gate is unforgiving: the hinge posts, the operator, and the leaf weight all have to line up or the gate drops at the far end. We set swing gates with steel posts in concrete, and we verify the load before the operator ever gets bolted on.
Double Gate
A double gate, sometimes called a bi-parting gate, splits the opening into two leaves that meet at the center. It is the standard for wide driveways across Hidden Hills and Bell Canyon, where a single leaf would be too long and too heavy to swing safely. We install double gates with matched operators, sequenced closers, and a center stop that keeps both leaves from fighting each other.
Security Gate
A security gate is designed to stop more than just casual foot traffic. It means heavier steel, taller frames, reinforced posts, and automation that cannot be easily bypassed. We build security gates for Calabasas homeowners who want their driveway to be a real barrier, and we pair them with access control systems that let you decide who gets in and who waits at the road.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We are trained and equipped on nine gate-automation brands, but when it comes to new installation, three come up most often on Calabasas driveways: LiftMaster, DoorKing, and Elite. Each has its strengths. LiftMaster is the workhorse for residential swing and slide applications, and we carry their full line of operators and accessories. If your install calls for a LiftMaster, we will set it, program the travel limits, and wire the safety edges before we leave, not after you call us back.
DoorKing is common on larger estate gates and commercial-grade residential entries. We have installed DoorKing operators on gates from Bell Canyon to Malibu, and we know their wiring and control boards well enough to get the first visit right. Elite is a brand we trust for heavy double-swing gates, where the operator has to work harder and last longer. We stock OEM parts for all of these brands. Whether your new gate runs on a LiftMaster, a DoorKing, an Elite, or any other make, we can install it and stand behind it.
Signs You Need Gate Installation Right Now
Most gate replacements in Calabasas do not start with a gate that simply stopped working. They start with a gate that has been quietly failing for years. Here are the signs we see most often.
- The gate sags and scrapes the driveway. A gate that drags the ground means the posts have shifted or the hinges have worn past their service life. Shimmying it back into place buys weeks, not years. The permanent fix is a new gate hung on properly set posts.
- The welds are cracked at the corner joints. Cracks in steel are not cosmetic. They mean the frame is flexing under load, and once the crack opens, the gate begins to twist. A new fabrication with proper gusseting stops the problem instead of patching it.
- The opener struggles or stalls on cold mornings. A motor that works harder than it should is burning itself out, and it usually means the gate is too heavy or the track is out of alignment. A new gate matched to the operator solves both.
- You cannot get parts for the old gate anymore. Manufacturers discontinue models, and at some point the hinges, rollers, and latch hardware simply are not made. When you are welding mismatched parts onto a gate from the 1990s, it is time to replace the whole assembly.
- The gate no longer matches how you use the property. Maybe the kids are grown and you want security now. Maybe you bought an RV and need a wider opening. A new gate install is the clean way to get what you actually need instead of living with what the previous owner left behind.
Our Gate Installation Process - Step by Step
We do not show up with a trailer full of parts and start cutting. A gate installation is a measured process, and here is exactly what you can expect when you call Ironworks Gate Co.
- 1
Site measure and consultation. We come to your property, take precise measurements of the opening, check the grade, and look at where the posts will need to sit. We also talk about how you use the gate: pedestrian access, delivery trucks, school schedules, and whether you want it automated now or later. This is a free estimate, and the price we quote is the price you pay before we start.
- 2
Design and material selection. Based on the measure, we recommend the gate style, material thickness, and frame construction that fit the job. Steel is our standard. We discuss finish options, hardware, and opener compatibility. Nothing gets ordered or fabricated until you have approved the scope in writing.
- 3
Fabrication or ordering. If your gate is custom, we build it in our shop to the exact measurements from the site visit. If it is a manufactured gate, we order from a vetted supplier. Either way, the gate is built or pulled to spec, not adapted on site with a grinder and a prayer.
- 4
Post setting and gate installation. We dig, set, and pour the posts, then bond the concrete properly so the posts do not work loose in Calabasas’s clay-heavy soil. We hang the gate, set the reveals, and verify the swing or slide before any automation goes on. If an opener is included, we wire it, set the travel limits, and test the safety edges and obstruction sensors.
- 5
Final walkthrough and the 90-Day Done Right Promise. Before we leave, you walk the gate with us. We test it together, show you how the release works, and confirm the access control if installed. Then we hand you our written 90-Day Done Right Promise. If anything is off in the first ninety days, we come back and make it right. No paperwork, no arguing.
How Much Does Gate Installation Cost in Calabasas?
Gate Installation in Calabasas typically runs between $3,800 and $9,500 for a standard automated driveway gate, depending on the gate type, material, opener, and site conditions. A pedestrian gate alone usually lands between $1,200 and $3,200. A double swing gate with full automation on a wide driveway can push toward $12,000 or more when you factor in reinforced posts and access control. Here is a breakdown of what drives the number.
| Gate Type | Typical Range in Calabasas |
|---|---|
| Pedestrian Gate (steel, basic hardware) | $1,200 - $3,200 |
| Single Swing Gate (no automation) | $2,800 - $5,500 |
| Single Swing Gate (with opener) | $4,500 - $8,000 |
| Sliding Gate (with opener and track) | $5,000 - $9,500 |
| Double Swing Gate (full automation) | $7,000 - $12,500+ |
The biggest cost factors are the gate’s length and weight, the type of opener (a DoorKing or Elite operator costs more than a basic residential unit, and it lasts accordingly), whether your posts need to be replaced, and whether the site requires concrete work, grading, or trenching for power and control wiring. Calabasas hillsides add cost too: a sloping driveway means deeper post footings and sometimes a custom track.
How do you avoid overpaying? Get a written estimate that itemizes the gate, the posts, the opener, and the labor. If a contractor cannot break it down, walk away. Our estimates are free, itemized, and fixed before any work starts. We quote the job, you approve it, and the number does not move unless you change the scope. Call (747) 308-3262 to schedule a free measure.
Gate Installation Near Calabasas - Our Service Area
Ironworks Gate Co. installs gates throughout Calabasas and the surrounding communities: Hidden Hills, Bell Canyon, Topanga, Agoura Hills, West Hills, Malibu, Canoga Park, Oak Park, Tarzana, Winnetka, and Westlake Village. If you are in the Calabasas area, we are close. For a look at our work in neighboring communities, see our Gate Installation in Topanga page or our Gate Installation in West Hills page. You can also return to our home page for the full scope of our services.
Serving Calabasas, CA - Our Local Coverage Area
We’re based in the Calabasas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Calabasas
Gate installation is the full process of measuring your driveway or walkway opening, fabricating or ordering a gate to fit, setting the posts, hanging the gate, and optionally wiring automation and access control. It includes everything from the concrete footings to the final adjustment of the opener’s travel limits. At Ironworks Gate Co., every installation ends with a walkthrough and our written 90-Day Done Right Promise.
A standard driveway gate installation in Calabasas takes two to four weeks from approved estimate to finished install. Custom fabrication adds time, as does concrete work, hillside grading, or trenching for power and control wiring. We never rush a gate job, and we will give you a clear timeline when we hand you the written estimate. Call (747) 308-3262 for a specific timeline on your project.
A driveway gate installation in Calabasas generally runs $3,800 to $9,500, with larger double gates and estate entries going higher. Pedestrian gates start around $1,200. The final number depends on gate size, opener brand, post conditions, and site work. We provide free, itemized estimates before any work begins, so you know exactly what you are paying for before you commit.
Yes. We install and program LiftMaster, DoorKing, and Elite operators, and we stock OEM parts for all three. We are also trained on FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule, so whatever brand fits your gate, we can wire it, set it, and stand behind it. If you are unsure which opener belongs on your new gate, we will spec it during the free site measure.
Gate installation is not Emergency Gate Installation in Calabasas, CA work. A gate must be measured, built or ordered, and set correctly, and that takes time. If your existing gate has failed and you need it secured immediately, we can often brace, weld, or temporarily secure it so your property is protected while the new gate is being prepared. Call us any time, day or night, and we will tell you honestly what can be done today and what should be done properly.
Every gate installation from Ironworks Gate Co. is covered by our written 90-Day Done Right Promise. If anything is not right in the first ninety days, we come back and make it right, no hassle and no paperwork. Manufacturer warranties on openers and hardware apply separately, and we handle any warranty claims on the products we install. Our guarantee is in writing, on every job.
You do not need to do much. Clear the area around the gate opening, move vehicles out of the driveway on install day, and let us know if there are underground utilities, irrigation lines, or landscape lighting near the posts. We handle the rest, including pulling permits where required and coordinating the power run if you are adding automation. If there is anything specific about your property, tell us at the free measure and we will plan for it.
Schedule Your Gate Installation Service in Calabasas Today
A new gate is a decision you will live with for decades. Get it done right the first time. Call Ironworks Gate Co. at (747) 308-3262 for a free, no-obligation estimate from Victor Salinas and our team. We will measure, quote a fixed price, and stand behind the work in writing. A live person answers, 24 hours a day, 7 days a week.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Calabasas since 1984.