Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Malibu, CA
Salt air and canyon grades make gate repair in Malibu a different trade than it is a few miles inland. A gate operator that would run quietly for five years in Calabasas can seize up in eighteen months facing the Pacific. Ironworks Gate Co. has crews in Malibu every week, from Malibu Colony to Point Dume, and we answer the phone around the clock. If your gate is stuck, grinding, or refusing to open, call (747) 308-3262. We’ll tell you straight what it will cost before we turn a single bolt.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Malibu Homeowners Choose Ironworks Gate Co.
We’re a gate specialist, not a general contractor who happens to own a welder. Victor Salinas built Ironworks Gate Co. around one trade: driveway and estate gates. That focus matters in Malibu, where a gate has to survive salt fog, shifting canyon soil, and a power grid that occasionally leaves homeowners on their own. We arrive in uniformed trucks, background-checked technicians, and we write the price down before work starts. No surprises on the bill.
Homeowners in Malibu Colony and along Latigo Canyon call us because we diagnose properly the first visit. When a swing gate binds on a steep driveway, it’s rarely just the hinge. The post has usually moved, the opener is fighting the grade, and the safety edges may be tripping intermittently. We find that on the first trip, not the third. Every job we finish is covered by the 90-Day Done Right Promise, a written guarantee with no fine print. If it isn’t right, we come back and make it right. That’s the whole promise.
Gate Repair Services We Offer in Malibu
From a rusted hinge on a PCH beach house to a full automation retrofit on a carbon-canyon estate, the work breaks into five services we handle directly:
Gate Repair
Stuck gates, sagging frames, broken hinges, bent tracks, and gates that open halfway then reverse. We diagnose the root cause and repair it on-site in most cases. Learn more about our Gate Repair in Malibu.
Gate Installation
New driveway gates, estate gates, and pedestrian gates built for Malibu’s specific conditions: slope-rated hardware, marine-grade coatings, and wind load consideration for oceanfront properties. Learn more about our Gate Installation in Malibu.
Gate Motor & Opener
We service and install automation on nine major brands including LiftMaster, DoorKing, and Elite. Battery backup and manual release are standard conversation points for every Malibu motor job since 2018. Learn more about our Gate Motor & Opener services in Malibu.
Gate Access Control
Keypads, intercoms, phone-based entry systems, and vehicle detection loops. We wire, program, and test the full system so it opens for you and no one else.
Gate Parts & Welding
Off-hinge gates, cracked steel frames, missing pickets, broken gate wheels. Our shop welds and reinforces on-site, and we keep common Malibu-specific hardware stocked so one trip is often enough.
Neighborhoods We Serve in Malibu
We work throughout Malibu’s 90263, 90264, and 90265 zip codes. Typical response time for a repair call is same-day in most of the area, assuming we’re not already out on a canyon call.
- Point Dume
- Malibu Colony
- Carbon Beach
- Malibu Canyon
- Kanan Dume
Why Malibu’s Climate & Housing Affect Gate Repair
Malibu’s marine layer is a slow, constant enemy of gate hardware. The fog doesn’t just sit on the surface; it works its way into motor housings, control boards, and hinge bushings, corroding them months before visible rust appears on the outside. We regularly replace operator internals on ocean-facing properties in Malibu that are only two or three years old. In Calabasas or Agoura Hills, that same motor might run five years without issue. Near the water, full service every 12 to 18 months is simply what the equipment demands.
Then there’s the fire reality. After the 2018 Woolsey Fire, Malibu homeowners learned a hard lesson: a powered gate without battery backup becomes a locked door during a Public Safety Power Shutoff. Since then, battery backup with automatic manual release has become a near-standard request on every repair job we do in the canyon and PCH neighborhoods. Homeowners here remember neighbors whose gates wouldn’t open on evacuation night. That memory drives what Malibu now expects from gate equipment, and we lead every motor conversation in this city with the same question: will this gate open for you when the power is down?
Pricing for Gate Repair in Malibu
What you’ll actually pay depends on the work. Here’s what our Malibu customers typically see before discounts:
- Gate tune-up and hardware adjustment: $85 to $150
- Hinge or bracket replacement: $200 to $400
- Motor/operator repair: $350 to $700, depending on brand and parts
- Full operator replacement: $900 to $1,800 installed
- Welding repair on steel frame: $250 to $550
Every quote is written down and agreed to before we start. We don’t do open-ended estimates or “we’ll see how it goes” billing. The price is the price. Call (747) 308-3262 and we’ll give you a straight answer.
Service Area - Cities Near Malibu
Most of our work stays in Malibu, but our crews also serve nearby communities including Agoura Hills, Westlake Village, Calabasas, and Oak Park. Same ownership, same crews, same written guarantee.
Serving Malibu, CA - Our Local Coverage Area
We’re based in the Malibu area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Malibu
Most gate repairs in Malibu land between $200 and $700, depending on whether it’s a mechanical fix like a hinge or bracket, or an electrical fix involving the motor or control board. A full operator replacement runs $900 to $1,800 installed. We quote the price in writing before any work begins. Call (747) 308-3262 for an exact quote, and ask about the $50 off any repair over $250.
In most cases, yes. We keep Malibu on our daily route and maintain stock on the common parts that fail in salt air: hinges, photo eyes, control boards, and keypads. Same-day service depends on workload and the part your gate needs. Call (747) 308-3262 and a live person will tell you when we can be there, no answering service.
Yes. Since the 2018 Woolsey Fire, battery backup with automatic manual release has become standard practice on nearly every Malibu gate motor job we do. If your gate doesn’t currently have a working battery backup, we’ll bring it up in the quote conversation, not as an upsell but as a safety baseline. The hillside and canyon neighborhoods in 90265 particularly need this.
Salt-laden fog from the Pacific works its way into motor internals, control boards, and hinge bushings, corroding them before visible rust even shows on the surface. Ocean-facing Malibu gates typically need full operator service every 12 to 18 months, compared to three to five years a few miles inland. We spec marine-grade hardware and corrosion-resistant coatings on every oceanfront job. Call (747) 308-3262 for an assessment.
Every job we complete carries the 90-Day Done Right Promise, a written guarantee. If something isn’t right within 90 days, we return and fix it. No paperwork, no argument, no exceptions. That’s been our standard since 1984.
Written by Victor Salinas, Owner of Ironworks Gate Co., serving Malibu with dedicated gate repair, installation, and automation since 1984.
Ready to get your gate working right? Call (747) 308-3262 for a free estimate. A live person answers, 24 hours a day, every day. You’ll know the price before we start. That’s the way we’ve done business for over 42 years, and that’s the way we’ll do it for the next forty.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Malibu Customers Say
"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram