Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLinear Gate Installation in Calabasas: What to Know First
Linear gate installation in Calabasas typically runs $1,900 to $4,800 for a complete single swing gate with operator, and most jobs are scheduled within 5 to 10 business days. We provide independent Linear gate installation, service, and repair across Calabasas, Hidden Hills, and the surrounding foothill communities. The price is quoted and agreed before any work starts, and the quote is free.
This page is for Calabasas homeowners who already own a Linear opener or are planning a new gate around one. If you’re standing in the driveway looking at a gate that won’t move, call (747) 308-3262 and a live person will answer. We’re an independent Linear service provider, not a factory warranty center, but we know these openers well enough to tell you honestly whether a repair makes sense or a new installation is the smarter money.
How Linear Products Fail - and How We Fix Them
- Linear ACT-34B and actuator arm drift on hillside properties. Calabasas driveways are rarely flat, and we regularly see actuator arms on slope-mounted gates slowly lose their limit settings. The gate starts stopping six inches short of closed, then a foot. The cause is usually a worn internal limit switch, not the motor itself. We set the limits, test under load, and replace the switch if it will not hold calibration.
- Linear MegaCode receiver interference on double gates. Linear’s MegaCode rolling-code receivers are generally reliable, but on dual-gate setups in Calabasas we’ve traced erratic operation to one receiver trying to talk to two boards through a failed communication wire. Homeowners replace remotes and reprogram keypads when the problem is a chafed low-voltage wire in the underground conduit. We test the path before touching the electronics.
- Linear LRA and DRA series swing-arm operators wearing nylon bushings in dry heat. Santa Ana seasons are hard on synthetic components. Those nylon bushings inside the arm pivot get brittle after seven or eight years and crack, which makes the gate hesitate mid-swing or bind at the hinge point. OEM bushing kits are inexpensive and the replacement is straightforward; the trick is catching the wear before it wallows out the aluminum housing.
- Linear APeX control boards failing after power surges. The APeX series boards are sensitive to the voltage spikes that roll through the canyon areas during storm season. A gate that ran fine on Monday and is dead on Tuesday after a lightning storm usually needs the board replaced, not the motor. We install surge suppression on every new Linear installation in Calabasas as standard practice. It is a $60 part that saves a $400 board.
- Linear Photocell sensor misalignment from soil movement. Calabasas sits on expansive clay soil that shifts with rain and drought cycles. When the ground moves, the safety photocells on either side of the gate opening drift out of alignment and the gate refuses to close, or reverses mid-travel. We reset the sensor posts in concrete and aim them properly, which fixes most “my gate keeps going back up” calls without replacing a single component.
Our Linear Gate Installation Process
- 1
You call, a person answers. We ask about your gate, your opener model if you know it, and what it’s doing or not doing. If it’s an emergency, we tell you honestly when we can be there.
- 2
We come out and look. A technician walks the site, checks the hinges, the posts, the operator mount, the power feed, and the control wiring. We find out what failed and whether it took anything else with it.
- 3
You get a written price. Before any work starts, we quote the job line by line. We’ll tell you where OEM Linear parts are the right call and where a quality aftermarket part does the same job for less. The choice is yours, and the number does not change once you approve it.
- 4
We do the work. Installation, wiring, limit setup, force settings, remote programming, keypad entry, safety sensor alignment. Most Linear installations are completed in one visit.
- 5
We test it hard. Twenty open-close cycles, obstruction reversal, photo-eye interruption, remote and keypad function. A gate that passes inspection is a gate that closes like it should.
- 6
You get the 90-Day Done Right Promise in writing. If anything is not right, we come back and make it right. No arguing, no paperwork, no fine print.
What Linear Gate Installation Costs in Calabasas
Here’s what we quote most often in Calabasas:
- Single swing gate with Linear LRA actuator: $1,900 to $3,200, depending on gate weight and post condition
- Double swing gate with paired operators: $3,500 to $5,800
- Sliding gate with Linear SLR rack-driven operator: $2,800 to $4,500
- Pedestrian gate with Linear keypad entry: $1,200 to $2,400
- Full installation including new gate, operator, keypad, and safety edges: $4,800 and up
What moves the price is gate weight, post depth, the condition of existing steel, and how far the power lines have to travel. A Calabasas hillside job with a long conduit run costs more than a flat Hidden Hills driveway. Every quote is free, written, and locked before we start. Call (747) 308-3262 and we’ll give you honest numbers for your specific gate.
Why Calabasas Homeowners Call Ironworks Gate Co. for Linear Work
Victor Salinas started working on gates in the Las Virgenes corridor over forty years ago, and the company he built still treats a Linear opener like a piece of machinery that deserves respect, not a part to swap blindly. We’re trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because when a Linear board fails and the best fix is a compatible retrofit using a different brand’s operator, we can tell you honestly and install it correctly the first visit.
Every job ends with the 90-Day Done Right Promise: a written guarantee, no fine print, no phone tag. A live person answers our phone 24 hours a day, 7 days a week. And we settle the price before a single bolt is turned, so there are no surprises on the bill. If the gate is giving you trouble, there is a reason – we just have to find it.
FAQs
We install and service Linear gates as an independent provider, which means we handle the labor side while you handle any factory parts warranty through Linear or your original installer. We will tell you in advance which components are likely under warranty and which are not, so there are no surprises. Call (747) 308-3262 and we can talk through your specific setup.
Yes, and it’s a job we do regularly in Calabasas. The gate posts need to be checked for depth and plumb, the hinges have to be rated for automated use, and we’ll need a dedicated low-voltage power run. We quote the whole job, including any structural work the gate needs first, before we start.
In Calabasas and the nearby foothill communities, we can usually schedule service within 24 to 48 hours for a gate that’s stuck closed. If it’s a true emergency where the driveway is blocked and vehicles cannot leave, call (747) 308-3262 and we’ll tell you honestly when a technician can be there. A live person answers around the clock.
Both, depending on the job. Linear’s OEM boards, actuators, and receivers are worth the cost when the part is still in production and the failure is the kind that repeats. For older Linear models discontinued years ago, we often source quality aftermarket equivalents that are actually more available than factory stock. We’ll show you the price difference and let you decide.
Generally, if the operator is under eight years old and the failure is a board, a limit switch, or a bushing kit, repair is the better money. If the motor itself is shot or the operator predates the current MegaCode receiver era, a new Linear installation usually costs less over the next five years than nursing the old one along. We’ll quote both and give you a straight answer, not a sales pitch. Call (747) 308-3262 for a free estimate.
Contact Ironworks Gate Co. for Linear Gate Installation in Calabasas
If your Linear gate needs a new installation, a motor replacement, or an honest second opinion on a quote you already received, call (747) 308-3262. A live person answers 24 hours a day, every day. Estimates are free, the price is set before we start, and the 90-Day Done Right Promise is in writing. Serving Calabasas, Hidden Hills, Agoura Hills, and the surrounding foothill communities.
Written by Victor Salinas, Owner & Lead Gate Technician, Ironworks Gate Co. at Ironworks Gate Co., serving Calabasas and nearby areas.