Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Reseda
Gate repair in Reseda runs $180 to $400 for most hinge, post, and alignment jobs, and $250 to $650 when an electric operator or control board is involved. We get to Reseda homes fast, with fully stocked trucks and technicians who know the 91335 and 91337 blocks. If your gate sags, drags, or refuses to open, call (747) 308-3262 and we’ll give you a straight answer and an upfront price before any work begins.
Why Ironworks Gate Co. Is Reseda’s Preferred Gate Repair Company
Ironworks Gate Co. has been the Gate Repair company Reseda homeowners call when the last fix didn’t hold. We’ve worked on hundreds of the wrought-iron and tubular-steel driveway gates that front the ranch homes along Saticoy, Victory, and Sherman Way. Those gates went up in the 1980s and 90s, and thirty years of Valley heat and Santa Ana wind have taken their toll. Victor Salinas, our founder, built the company around a simple rule: if it isn’t right, we come back and make it right. That’s our 90-Day Done Right Promise, in writing, on every job.
What sets us apart in Reseda is what we check before we quote. A sagging gate on a 1960s ranch off Corbin Avenue is often not a hinge problem at all. It’s the post. We’ll level the pilaster, check the footing, and tell you the truth about what’s holding that gate up. A live person answers our phone 24 hours a day, seven days a week. No voicemail trees, no callbacks. Call (747) 308-3262 and you’ll get a real person who knows gates.
Our Gate Repair Services in Reseda
Most of what we do in Reseda falls into four categories. Each one starts with a free assessment. No charge to look, no charge to tell you what’s wrong.
Electric Gate Repair
Reseda’s summer highs of 105 to 110 degrees cook gate operator circuit boards faster than most manufacturers anticipate. When an electric gate stops mid-cycle or hums without moving, we test the motor, capacitor, limit switches, and control board on site. We service nine automation brands, so whatever opener is on your driveway, we likely have the part on the truck.
Automatic Gate Repair
Automatic gate repair in Reseda often means chasing thermal faults. Operators not rated for sustained high-ambient heat will trip their thermal overload at 2 p.m. and work fine again by 8 p.m. That intermittent failure pattern is something local techs recognize immediately because it happens here every summer. We replace underrated units with heat-appropriate operators and wire them properly for the load.
Hinge & Post Repair
This is the most misunderstood repair in Reseda. A 1994 Northridge Earthquake-era CMU pilaster with a one to three degree lean will pull a gate out of alignment no matter how many new hinges you bolt on. We level the post, repair the masonry if needed, then re-hang the gate with new hinges. Done in that order, the gate will clear the ground by a full inch or more, and it stays where we put it.
Gate Realignment
Slide gates on the flat Valley floor straddle a rail that slowly shifts as the concrete pad settles in clay soil. Swing gates drift when their posts lean. Either way, the symptom is the same: a gate that scrapes, catches, or won’t latch. Our realignment work starts with a 4-foot level and a careful look at the base of every post. Then we correct the geometry before we touch the hardware.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Reseda
Reseda driveways carry a mix of aging gate operators. DoorKing and Elite units are common on the 1990s installs. LiftMaster operators show up on newer retrofits. Mighty Mule is everywhere because it’s what the home centers sell. We’re trained and certified on all of these plus five more brands, which means the correct fix gets made on the first visit, not after three trips and a guess. For Reseda customers, we keep common boards, limit switches, and receiver modules stocked locally so downtime stays short.
Common Gate Repair Problems We See in Reseda Homes
- Sagging swing gates with fresh hinges that didn’t help. The post is typically drifting. A 1994 quake-era block pilaster in the 91335 ZIP can carry a one to three degree lean that was never corrected. New hardware on a leaning post is money wasted.
- Slide gates that bind on hot afternoons. At 105 degrees, a steel gate frame expands enough to close a quarter-inch track clearance to nothing. It runs fine at 8 a.m. and sticks at 3 p.m. We shim, adjust, and replace rollers with heat-tolerant material.
- Weld cracks at the hinge line. Santa Ana winds slam unlatched swing gates against their stops every fall. Over enough seasons, those repeated impacts crack the welds where the hinge plate meets the gate frame. We grind, re-weld, and often add a wind latch while we’re there.
- Operators that died in the heat. Reseda’s sustained 100-plus degree days cook capacitor and transformer components on units not rated for that duty cycle. The fix is a replacement rated for the ambient temperature, not another identical board waiting to fail next July.
Pricing for Gate Repair in Reseda, CA
Here’s what gate repair actually costs in Reseda. Hinge and post repair on a standard single swing gate runs $180 to $320. Gate realignment runs $150 to $275. Electric gate repair, including diagnostics, runs $250 to $650 depending on whether it’s a capacitor, receiver, or full control board. Weld and rust repair runs $200 to $450 per gate section. The price we quote is the price you pay. We settle it before a single bolt is turned. Every quote is free. Call (747) 308-3262 and we’ll give you a number on the spot.
We Also Serve Cities Near Reseda
Our Gate Repair in Reseda crews regularly work the surrounding Valley neighborhoods too. If you’re in Winnetka, Tarzana, Canoga Park, or Chatsworth, the same local team covers your block with the same 90-Day Done Right Promise and the same live-answer phone line.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Reseda
Because the post is leaning, not the hinges failing. Many Reseda pilasters built around the 1994 Northridge Earthquake era carry a one to three degree unremediated lean in the block wall itself. A leaning post will sag the gate within months no matter how fresh the hinges are. We fix the post first, then the hinges. Call (747) 308-3262 for a free post-level assessment.
Yes, if it’s sized correctly. Long Reseda driveways off Tampa and Corbin often put the gate far from house power, and a solar operator with the right panel wattage and battery capacity will handle a single swing gate reliably. The key is matching the panel to the duty cycle and the summer heat load. We’ll spec the right unit for your gate’s weight and your actual sun exposure. Estimates are free.
At 105 degrees, the steel frame expands and closes the track clearance to zero. It cools off overnight and runs fine in the morning. That’s a classic Reseda summer pattern. We adjust the clearance, replace warped aluminum rollers with steel, and sometimes shim the rail to give the gate room to expand. The fix is mechanical, not electrical. Call (747) 308-3262 and we’ll diagnose it same day.
Install a wind latch or a drop rod. Santa Ana events in the Valley routinely hit 40 to 60 mph gusts, and an unlatched swing gate becomes a sail. Every season, we re-weld hinge plates and straighten bent latch posts on gates that were left unlatched during a wind event. The permanent fix is a proper wind latch and discipline about closing the gate. We can install one during a standard repair visit.
No, standard gate repair and post reset work in Reseda does not require a permit. If the damage extends into the perimeter block wall itself and structural masonry repair is needed, LADBS may require a permit for that portion. We’ll tell you what falls where before any work starts, and we’ll handle the parts we’re licensed to handle. Call (747) 308-3262 for an on-site look. Estimates are free.
The Earthquake Post Problem Most Reseda Homeowners Miss
The 1994 Northridge Earthquake had its epicenter directly beneath Reseda. That’s not trivia. Thirty years later, it’s the reason so many swing gates in the 91335 ZIP sag, drag, and eat hinges. The block pilasters those gates hang on took a beating in 1994, and many were never properly reset. A one to three degree lean doesn’t sound like much, but at the end of a ten-foot gate panel, it translates to two or three inches of drop at the latch side. Homeowners replace hinges, then rollers, then the latch, and the gate still drags. It drags because the post is tilting. Slowly. Every year a little more.
In Reseda’s 91335 area, our tech diagnosed a sagging tubular-steel swing gate on a 1960s ranch property as a tilting hinge post, not a panel problem. After checking the post footing and correcting the masonry lean, we re-hung the gate with new hinges and it cleared the ground by a full inch. That’s the difference between treating the symptom and fixing the cause. If your gate has been adjusted twice already and still sags, the post is almost certainly the problem. We’ll put a level on it and show you the read. Free of charge.
This page tells Reseda homeowners how to spot that post lean before paying for a hinge or operator repair that won’t last. Put a 4-foot level vertically against the hinge-side post. If the bubble sits outside the center lines, that post is out of plumb. No new hinge will fix it. No operator will fix it. The post needs to be reset, then the gate re-hung. That’s the repair that lasts.
Call Ironworks Gate Co. at (747) 308-3262 for gate repair in Reseda. A live person answers. The estimate is free. The price is settled before we start. And every job carries our 90-Day Done Right Promise in writing. Victor Salinas built this company to be the last gate call you ever make. We intend to keep it that way.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Reseda and the San Fernando Valley since 1984.