Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Reseda, CA
Most gate repair calls in Reseda trace back to the same root: a pilaster that shifted during the 1994 Northridge Earthquake and was never corrected. We see it on nearly every block in 91335 and 91337. Before we quote a hinge or a roller, we put a level on the post. That habit, built from three decades of working on earthquake-era CMU walls, is why our repairs hold when other companies’ work fails within a year.
If your driveway gate is sagging, dragging, or refusing to open, call (747) 308-3262. A live person answers, 24 hours a day. We’ll schedule a visit, diagnose the real problem, and give you a written price before any work begins.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Reseda Homeowners Choose Ironworks Gate Co.
Reseda is a neighborhood of long-held homes. The people who call us have usually owned their property for twenty, thirty, sometimes forty years. They remember the last contractor who showed up late, charged more than quoted, or patched a weld that broke again by spring. Those homeowners call us because Victor Salinas built this company in 1984 on a simple rule: do the work so it stays done, and stand behind it in writing.
We serve the blocks south of Sherman Way, the ranch homes around Reseda Park, the streets off Saticoy and Tampa, and the quieter stretches east of Lindley. Every technician who arrives at your door is background-checked and uniformed. We carry service certification on nine gate-automation brands, including DoorKing, Elite, and LiftMaster, so the fix is correct the first visit. And every completed job, from a hinge replacement to a full opener rebuild, is covered by our 90-Day Done Right Promise. That promise is written on your invoice. No paperwork, no arguing. If it’s not right, we come back and make it right.
Our home page has more on who we are and how we work.
Gate Repair Services We Offer in Reseda
Gate Repair
Sagging gates, bent hinges, cracked welds, binding tracks. We diagnose the cause, not just the symptom. In Reseda, that often means checking the pilaster before we reach for a wrench.
Learn more about our Gate Repair in Reseda.
Gate Installation
New driveway gates measured to your opening, built square, and set on posts that are plumb and solid. We handle wrought iron, tubular steel, and wood-frame gates with the same standard: hung true on day one, still true years later.
Learn more about our Gate Installation in Reseda.
Gate Motor & Opener
We service and install swing, slide, and cantilever operators. If your opener overheats in Reseda’s summer heat, or a Santa Ana wind event bent the arm, we’ll set it right. We stock parts for DoorKing, Elite, Mighty Mule, and other major brands.
Learn more about our Gate Motor & Opener in Reseda.
Gate Access Control
Keypads, telephone entry systems, vehicle sensors, and intercoms wired correctly and programmed so they work every time. We also repair existing systems when the wiring was done poorly the first time.
Contact us for a free estimate on access control upgrades in Reseda.
Gate Parts & Welding
Broken pickets, rusted frames, hinge posts chewed through by decades of use. Our welders repair steel and iron on site, and we fabricate replacement parts when off-the-shelf pieces won’t hold.
Call (747) 308-3262 to have a part fabricated or a weld repaired.
Neighborhoods We Serve in Reseda
We cover all of Reseda, both ZIP codes, from the 101-adjacent blocks in the south to the neighborhood border along the Los Angeles River in the north. Typical response time is same-day for gate repairs that block driveway access, and next-day for most other service work.
- Reseda Ranch (91337)
- North Reseda, along Sherman Way and Saticoy (91335)
- Reseda Park area, near Reseda Blvd. and Victory
- South of the 101, along Tampa Ave.
- Streets east of Lindley Ave.
Why Reseda’s Climate & Housing Affect Gate Repair
Reseda sits on the flat San Fernando Valley floor, and in summer the thermometer regularly runs to 105 or 110 degrees. That kind of sustained heat makes steel gate frames expand. A gate that swings freely at 8 a.m. can bind against its stop by 3 p.m. It warps aluminum slide-gate rollers. It overheats automatic operators that were never rated for high-ambient exposure. Then come the Santa Anas, funneling down the Valley and slamming unlatched gates against their stops hard enough to bend hinge pins and crack weld seams. This is a predictable annual cycle on Reseda driveways. We plan for it. When we install or repair, we select fasteners, rollers, and operators rated for the heat this ZIP actually gets, not the mild coastal numbers printed in a national parts catalog.
The housing stock matters too. Reseda is overwhelmingly post-WWII ranch homes built in the 1950s through the 1970s, almost all fenced with concrete block perimeter walls. That layout practically requires a driveway swing or slide gate. Most of those gates were added or upgraded in the 1980s and 1990s, and thirty to forty years of Valley sun and Santa Ana cycles have left them with fatigue at the weld seams and hinge points. The gates are not decorative afterthoughts here. They are load-bearing boundaries, and the metal is tired.
But the single most important local factor is the 1994 Northridge Earthquake. The epicenter was directly beneath Reseda. The quake cracked thousands of concrete block pilasters, and many of those cracks were never repaired. Three decades later, a gate that sags slightly to one side may not have a hinge problem at all. It has a post that is still leaning. Our technicians probe every pilaster base with a level before quoting any repair. No amount of new hardware keeps a gate aligned when the post it hangs on is drifting. If we find a leaning post, we tell you plainly and coordinate the masonry fix first. Then we do the gate work, and it holds.
Familiarity with this exact failure pattern is why Reseda homeowners call us. We already know what we are going to find before we open the gate.
Pricing for Gate Repair in Reseda
Every job gets a written quote before we turn a bolt. Here is what Reseda homeowners typically see:
- Hinge replacement on a standard wrought-iron gate: $180-$340 per hinge set
- Weld repair on a cracked seam or broken picket: $120-$260 depending on access and extent
- Slide-gate roller replacement: $150-$320 including track adjustment
- Opener repair (board, arm, or gearset): $240-$550 for common DoorKing, Elite, and LiftMaster models
- Full operator replacement installed: $900-$1,800 depending on brand and gate weight
- Post or pilaster straightening (if repairable): $350-$800, quoted after site inspection
Standing offers for Reseda customers: $50 off any repair over $250. A free second opinion on any written estimate you have from another company. An $89 seasonal tune-up for gate and opener. And a permanent 5% discount for seniors and veterans. The price we quote is the price you pay. We settle it before the work starts, and the 90-Day Done Right Promise is on your invoice.
Service Area - Cities Near Reseda
While this page focuses on Reseda, our crews also serve the surrounding San Fernando Valley communities. If you live nearby, we are the same company, same standards, same written guarantee. Learn more about our work in Winnetka, Tarzana, Canoga Park, and Chatsworth. Same phone number, same live-answer policy.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Reseda
Most hinge, weld, and roller repairs in Reseda run between $150 and $400, while opener repairs typically fall between $240 and $550 depending on the model and what failed. Every job is quoted in writing before work starts, so you always know the number. Call (747) 308-3262 for a free estimate.
If your gate is stuck open or blocking your driveway, we treat it as an emergency and dispatch a technician same-day. Most other repairs are scheduled next-day. A live person answers the phone 24 hours a day, 7 days a week, so call (747) 308-3262 and we will tell you exactly when to expect us.
It matters more than most homeowners realize. Reseda was the epicenter of the Northridge quake, and many concrete pilasters in 91335 and 91337 carry internal cracking that was never addressed. Before quoting any hinge or operator repair, our technicians level the post. If the post is leaning, we flag it first. No gate repair will hold on a drifting post.
We service nine major brands, including LiftMaster, DoorKing, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, and Ghost Controls. Chances are strong we have the part on the truck. If you tell us the brand when you call, we can often confirm parts availability before we arrive.
Everything we touch. If any repair or installation we perform in Reseda is not right within 90 days, we come back and make it right at no charge. It is a written guarantee on your invoice. No paperwork, no arguing. That has been our standard on every job since 1984. Call (747) 308-3262 and ask us about it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Reseda and the San Fernando Valley with gate repair, installation, and automation since 1984.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Reseda Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett