Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Reseda
Gate installation in Reseda runs $1,800 to $9,500 for a complete automatic driveway gate, depending on whether the existing concrete pilasters are still square or need masonry work first. Most pedestrian gates run $600 to $2,400, and a good crew can have a standard swing gate on a ranch-style lot measured, fabricated, and swinging in 5 to 10 business days. We know this market because we’ve been pulling up to earthquake-era CMU posts and 1990s operator boxes here for over 42 years. If you’re on the fence about whether a gate can be saved or needs full replacement, call (747) 308-3262 and we’ll level the posts and tell you straight.
Reseda isn’t like other parts of Los Angeles when it comes to gates. The 1994 Northridge Earthquake had its epicenter directly beneath this neighborhood, and the post-quake rebuild put up thousands of driveway gates in a three-year window. Those gates are now hitting end-of-life together. We’ll get into what that means for your pilasters, your hinges, and your operator later on this page. First, here’s the short version: if your gate sags, don’t assume new hinges fix it. Check the post. In Reseda, the post is often the problem.
Why Ironworks Gate Co. Is Reseda’s Preferred Gate Installation Company
We’ve been welding, hanging, and automating gates across the San Fernando Valley since 1984, and we’ve watched a full generation of Reseda gates age out. That history matters because we’ve seen what 1994-1997 era hardware does at year 25, year 28, year 30. A one-truck handyman sees a sagging gate and replaces hinges. We see a concrete block pilaster that’s been drifting 1 to 3 degrees since the quake and will eat the next set of hinges the same way. That’s the difference between a gate that stays aligned and one that needs attention every two years.
Victor Salinas leads our gate installation work, and the standard he holds every crew to is the same one we’ve applied since the first Reseda ranch house we worked on: krafted right, every time, your home first, standing behind it. Our technicians are background-checked and uniformed. They arrive when we say they’ll arrive. And every completed job carries the 90-Day Done Right Promise in writing. If something isn’t right, we come back and fix it. No paperwork, no arguing. That’s how we’ve kept Reseda homeowners calling us back for over four decades.
A live person answers our phone 24 hours a day, 7 days a week. You won’t reach a voicemail tree or an answering service. If a gate has failed and you can’t get a car in or out at 9 p.m. on a Tuesday, you’ll talk to someone who can actually send help. For installation work specifically, we book a free measure and provide a written price before any steel is ordered.
Our Gate Installation Services in Reseda
Our Gate Installation team handles everything from a single pedestrian gate on a Sherman Way side yard to a full sliding driveway gate with automation on a corner lot off Tampa Avenue. Here’s what most Reseda homeowners call us for.
Driveway Gate Installation
The standard Reseda driveway is a two-car opening on a 50-by-150 lot, flanked by CMU block walls built in the 1950s or 1960s. A new automatic driveway gate there typically means a single swing leaf or a sliding gate if the driveway slopes toward the street. We measure, spec the steel for the heat, and handle the operator, safety sensors, and keypad as one job. Most full driveway gate installations in Reseda run $3,200 to $9,500, with swing gates on the lower end and slide gates on the higher end.
Swing Gate Installation
Swing gates are the most common style across Reseda’s ranch-home streets, and they’re also the style most vulnerable to Santa Ana wind events. A properly installed swing gate gets heavy-duty hinges sized for the leaf weight, a wind-rated operator, and positive stops that won’t shear in a 50 mph gust. If your old gate has already been bent at the hinge points from unlatched wind swings, replacement is often cheaper than repeated weld repairs. We’ll quote it both ways so you can decide.
Sliding Gate Installation
Slide gates are the smart choice on Reseda lots where the driveway slopes uphill into the property, because a swing leaf will drag or bind on grade changes. They also hold up better in sustained 105°F heat when specified with steel wheels, since aluminum rollers warp and flat-spot in Valley summer temperatures. A new slide gate with an operator, track, and safety edges runs $4,500 to $9,500 in Reseda depending on gate length and whether poured concrete track work is required.
Pedestrian Gate Installation
Pedestrian gates on Reseda’s side yards and back walls are typically 3 to 4 feet wide, tubular steel or wrought iron, and matched to the driveway gate’s pattern. We install them with self-closing hinges and a latch rated for outdoor exposure year-round. A standard pedestrian gate installation runs $600 to $2,400. If you’re adding a pedestrian gate as part of a full driveway gate project, we’ll price it as one job and save you the mobilization cost.
Security Gate Installation
For Reseda homeowners wanting more than standard ornamental steel, we install reinforced security gates with locking stiles, anti-lift brackets, and automation rated for daily use. These are common on homes with alley access or on corner lots where the side gate faces a busy street. Expect $5,800 to $12,000 for a fully automated security-grade driveway gate with access control.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Reseda
We’re certified on nine major automation brands, and for Reseda customers we keep common parts stocked for the three we see most on Valley driveways: Linear, Viking, and DoorKing. That means if your operator fails during installation prep or needs a new control board before your gate goes live, we’re not waiting a week on a distributor. We have been trained on LiftMaster, FAAC, BFT, and Ghost Controls as well, so whatever opener is on the truck or already on your wall, we can integrate it or replace it without guesswork. Every operator we install comes with a manufacturer-backed warranty, and our own work carries the 90-Day Done Right Promise.
Common Gate Installation Problems We See in Reseda Homes
- Earthquake-era pilasters that aren’t plumb. In the 91335 ZIP, we regularly find concrete block posts leaning 1 to 3 degrees that were never corrected after the 1994 Northridge quake. A new gate hung on a leaning post will bind, sag, and blow through hinge sets. We check post plumb with a level before we spec any installation, and if the pilaster needs a new footing or a steel core, we say so before the gate is ordered.
- Obsolete 1990s operator control boards. Gates installed in the 1994-1997 post-quake rebuild window are now hitting 28 to 32 years old, and their original control boards are failing outright. Many of those boards are no longer manufactured, and no compatible retrofit exists. We’ll tell you honestly if your operator can be saved with a new board or if a full operator replacement is the cheaper path over three years.
- Summer heat expansion binding gates in their tracks. Reseda records regular summer highs of 105 to 110°F, and steel gate frames expand measurably at those temperatures. Gates that clear fine in February jam in August. We spec slide gates with steel wheels and thermal expansion gaps sized for this specific climate, not for coastal conditions.
- Santa Ana wind damage to swing gates. Seasonal wind events routinely slam unlatched swing gates hard against their stops, bending hinge straps and cracking welds. A properly installed double gate gets a wind-rated operator and center drop rod, but if your current hardware has already been through several Santa Ana seasons, replacement may be the safer bet than another weld repair.
Pricing for Gate Installation in Reseda, CA
Here are honest Reseda market prices for the work we do most often. These ranges include labor, materials, and a written warranty on our work. They are not bids. Your exact price comes from a free on-site measure and a line-item quote, and that price is settled before any work starts. If the price changes mid-job because of something we find in the wall or the ground, you approve the change first. No surprises on the invoice.
| Service | Typical Reseda Price Range |
|---|---|
| Pedestrian gate (steel, installed) | $600 - $2,400 |
| Single swing driveway gate, no automation | $1,800 - $4,200 |
| Single swing driveway gate with operator & sensors | $3,200 - $6,800 |
| Sliding driveway gate with operator & track | $4,500 - $9,500 |
| Security-grade driveway gate, full automation | $5,800 - $12,000 |
| Operator replacement on existing gate (Linear, Viking, DoorKing) | $1,100 - $2,600 |
Every quote includes haul-away of your old gate and operator. Every job carries the 90-Day Done Right Promise. Seniors and veterans get 5% off, always. Call (747) 308-3262 to schedule a free measure and written estimate.
We Also Serve Cities Near Reseda
Our gate installation crews work throughout this corner of the San Fernando Valley. Along with Reseda, we regularly install and automate gates in Winnetka, Tarzana, Canoga Park, and Chatsworth. If you live just over the line from Reseda, you’ll get the same 90-Day Done Right Promise and the same written price guarantee, quoted before work begins.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Reseda
Put a 4-foot level against the post the gate hangs from. If the bubble runs toward the gate or away from it, the post is leaning and new hinges won’t fix the sag. In Reseda’s 91335 ZIP, we commonly measure 1 to 3 degrees of drift that dates to the 1994 Northridge quake. The fix is resetting the post footing or coring and reinforcing the pilaster, then hanging the gate on a plumb post. Call (747) 308-3262 and we’ll check it during the free measure.
Sometimes. If your operator is a DoorKing, Linear, or Viking unit with a board still in production, a retrofit is straightforward and typically runs $400 to $900 for the board and labor. If the board is discontinued, which is common on 1994-1997 era operators, a full operator replacement is usually $1,100 to $2,600 and makes more sense than chasing obsolete parts. We’ll check the model number and tell you before any work is quoted.
In Reseda, it’s usually heat expansion. Steel frames expand in sustained 105°F weather, and if the gate was installed without proper thermal clearance, it binds in July and August but works fine the rest of the year. Aluminum rollers also warp in high ambient heat and flat-spot, which jams the gate. The fix is steel wheels, proper expansion gaps, and sometimes a track realignment. If the operator is also straining, a unit not rated for sustained high temperatures may be overheating. We diagnose all three during one visit.
Yes. Automatic gates in California must comply with UL 325 safety standards, which means photoelectric sensors and a reversing mechanism that stops and reverses the gate if it contacts something. If your existing gate predates those requirements, which many Reseda gates from the earthquake rebuild era do, any new operator installation includes bringing the safety system up to current code. We install sensors on every automated gate job in Reseda, no exceptions.
The best protection is a wind-rated operator with a positive locked stop and a center drop rod on double gates, so unlatched leaves can’t be slammed against their stops. If your gate has already been through multiple Santa Ana season cycles and shows bent hinge straps or cracked welds, replace those components now rather than after the next event. We would rather reinforce a gate in a one-hour visit than rebuild it after a 60 mph gust has folded it over.
One More Thing About Reseda Gates
Here’s the part that only applies to this neighborhood. The Northridge quake’s epicenter sat under Reseda, and the post-quake rebuild put up a wave of driveway gates between 1994 and 1997. Those gates are now aging out all at once: hinges worn to egg-shaped holes, welds cracked at stress points, operators with control boards that no company makes. But the silent problem is the pilaster. A concrete block post with unrepaired internal cracking from the quake can look fine while it’s slowly tilting, and that tilt shows up as a sagging gate. Homeowners replace hinges, then operators, then the gate itself, and the sag keeps coming back because the post is still drifting.
We saw exactly this recently on a 1970s ranch on Blythe Street in the 91335 ZIP. The gate had been hung right after the quake, and by the time we arrived it was sagging hard. Our tech probed the hinge post with a level and found the CMU pilaster leaning 2 degrees, still unrepaired seismic drift from 1994. We reset the post footing with new concrete, installed a new LiftMaster operator with safety photocells, and hung a new gate that clears its track without binding even on 105-degree Valley days. That job is the Reseda gate story in one visit: the visible problem was the gate, but the root cause was in the ground.
If your gate has been repaired once or twice already and still sags or binds, call us before you spend on a third repair. We’ll level the posts, check the operator, and give you an honest answer: retrofit or replace. Either way, the price is in writing before we touch anything. Call (747) 308-3262 for a free estimate on gate installation in Reseda.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Reseda and the San Fernando Valley since 1984.